Ladder Rack – 6″, 9″, 12″ Runways – 10 Foot

Gruber Cable Runway — 10 ft Ladder Rack (6″, 9″, 12″ Widths)

Gruber Cable Runway is designed to support backbone and horizontal cabling between building entry points, telecom/equipment rooms, and cross-connects on racks or cabinets. Used with other Gruber cable runway products, these ladder racks create a strong, standardized pathway for copper and fiber, keeping cable bundles organized, elevated, and protected.

Three models are available in nominal 10-foot lengths, with ladder widths of 6″, 9″, and 12″ to match different cable densities and aisle layouts. Each section is individually boxed to prevent scratching and damage during shipping and handling.

• Three sizes — 10 ft runway sections available in 6″, 9″, and 12″ widths.
• Backbone & horizontal support — Ideal between point of entry/exit and telecom or equipment rooms.
• Compatible with racks & cabinets — Integrates with Gruber runway fittings and accessories for a complete pathway system.

Construction & Ratings

• Side stringers: 1 1/2″ x 3/8″ x .065″ (38.1 mm x 9.53 mm x 1.65 mm).
• Rungs / cross members: 1/2″ x 1″ x .065″ (12.7 mm x 30 mm x 1.65 mm) welded at 9″ (230 mm) intervals.
• Overall length: approx. 9′ 8-1/2″ / 116.5″ (2959 mm) to comply with TELCO-style standards (marketed as 10 ft sections).
• Finish: black powder coating for a durable, professional look.
• UL Classified for suitability as an equipment grounding conductor only (per Underwriters Laboratories).
• Each section is individually boxed to prevent scratching and damage in transit.

Key Features & Best Practices

• Clean cable pathways — Supports and guides large cable bundles overhead, reducing strain on racks and patch panels.
• Scalable — Choose 6″, 9″, or 12″ widths to match current cable counts and future growth.
• Standards-friendly — Overall length and rung spacing designed to meet common TELCO-style practices.
• Recommended installation — Use with Gruber Runway Elevation Kits and associated fittings to maintain proper height, clearance, and bonding.

Whether you’re building a new telecom room, expanding an existing data center, or adding overhead cable support to a row of cabinets, Gruber’s 10 ft cable runway sections in 6″, 9″, and 12″ widths give you a robust, UL Classified solution for structured cabling support and grounding continuity.