$264.92
The Gruber Cable Runway E-Bend is designed to create a smooth, gradual bend in horizontal cascading cable runs and a gentle sweep in the horizontal plane of cable runway systems. By replacing sharp turns with a controlled radius, the E-Bend helps keep cabling in conformance with minimum bend radius requirements (typically 4× the cable diameter), protecting both copper and fiber performance over the life of the installation.
Fabricated from lightweight 1-1/2″ x 3/8″ (38.1 mm x 9.53 mm) tubular steel, this radius bend fits standard cable runway and ladder rack systems. Cross members are welded at precise angle increments to provide a consistent, repeatable arc, making it ideal for data centers, telecom rooms, and industrial cable plants where cable integrity and standards compliance are critical.
| Specification | Detail |
|---|---|
| Product Type | Cable runway E-bend (horizontal radius bend) |
| Function | Creates gradual bends and sweeps in horizontal cable runway runs |
| Application | Cascading cable runs on standard ladder rack / cable runway |
| Material | 1-1/2″ x 3/8″ (38.1 mm x 9.53 mm) tubular steel |
| Cross Members | Welded at approximately 23° increments for smooth radius |
| Orientation | Outside/inside defined by cross members welded closer to cable side |
| Compatibility | Fits standard cable runway / ladder rack stringers (matching width) |
| UL Classification | Only gold radius bends are UL Classified |
Why use Gruber E-Bends in your ladder rack design
